"Welcome to our Anchors Page"

We are proud to be a Red Head® stocking distributor

If an Anchor Type Fastener is needed - We have it!

	ANCHOR TYPE	KEY FEATURES	SIZE RANGE
	Dynabolt Gold® Heavy Duty Sleeve Type Anchor	Finished bolt head Removable bolt Thru-fixture fastening Grade 5, high shear bolt	3/8 - 3/4 Dia 2.0 - 7.25 Lg.
	Trubolt® Wedge Anchor	Fully-threaded Length ID Head stamped Stainless Steel clip Thu-fixture fastening	.25 - 1.25 Dia 1.75 - 12.0 Lg.
	Multi-Set II® Drop-In Anchor	RM - Flanged body to keep anchor flush with concrete surface RL - Non-flanged body for recessed setting RX - Designed for hollow core and post tension concrete CL - Designed for one-sided forming, accepts coil rod	RM and RL 1/4 - 3/4 Dias 1.0 - 3.19 Lg RX - .38 Dia x .75 Lg CL - 1/2 and 3/4 Dia 2.0 and 3.19 Long
	Dynabolt® Masonry Sleeve Anchor	Concrete, block and brick Many head style choices Thru-fixture fastening	1/4 - 3/4 Dia 5/8 - 6.25 Lg.
	Stud Stud Anchors	Bottom bearing Hammer-driven Ideal for jacking or leveling Easy installation	1/4 - 3/4 Dia 1.75 - 6.25 Lg.
	Redi-Drive® High Performance Hammer-Drive Anchors	Simple installation Small drill size No torque required Through fixture fastening	1/4 Dia 3/4 - 3.0 Lg.
	TAPCON® Self-tapping Concrete Anchors	Fast installation with Condrive tool Removable Cut own threads Bit included in every box Through-fixture fastening	3/16 & 1/4" Dias. 1-1/4 to 6" Lg.
	CONDRIVE® TAPCON Installation Tool Kit	Fast change from drilling to driving Eliminates need to change out chucks and bits Special nut driver is recessed for torque control to reduce head breakage Eliminates need for two tools	Includes bits for all sizes hex and phillips head
	Hammer-Set® Nail-drive Anchors	Easy installation Low profile head Through fixture fastening	3/16 - 1/4 Dia 7/8 - 2.0 Lg.
	E-Z Anchor® Nail-drive Anchors	Easy installation Fast - No Drilling Clean and Neat
	Poly-Set® All purpose plastic plug anchors	Unique twisting action Resistant to moisture, chemicals and atmospheric conditions Available in pre-packaged kits	3/16 & 1/4 Dia 1.25 - 1.48 Lg. 3/16 uses #6 - 8 screw 1/4" uses #10 - 12 screw
	Epcon® A7 Acrylic Adhesive Anchoring	Fast 35 min. curing time Fast and easy dispensing Auto mix dispensing Fast and easy dispensing Works in damp holes
	Epcon® C6 Epoxy Adhesive Anchoring	1 hour curing time Fast and easy dispensing Auto mix dispensing NSF standard 61 certified for drinking water systems Works in damp holes
	Epcon® G5 Extended Working Time Epoxy Adhesive Anchoring	8 hour curing time Fast and easy dispensing Auto mix dispensing Easier to install anchors in hot weather Easier installation of larger diameter anchors and deeper embedments
	Red Head® Carbide Drill Bits	Unbeatable Quality Long lasting Finest materials 100% Satisfaction Guaranteed	From 3/16" (4.8mm) to 2" (50.8mm) Diameters

The anchors shown above are manufactured by ITW/Ramset/Red Head.
For more information about their products go to http://www.itw-ramset.com or give us a call.