2. Attach second clip as close to loop as possible. Tighten nuts, but not firmly.

3. Attach balance of clips spaced equally between the first two clips. Tighten all nuts completely. Apply initial load - inspect nuts and retighten. Inspect all clips periodically.

The number of clips shown is based on using right regular or Lang lay wire rope, 6 x 19 class or 6 x 37 class, fibre core IWRC, IPS or XIPS. The number of clips shown also applies to right regular wire rope, 8 x 19 class and 18 x 7 class, fibre core, IPS or XIPS, sizes 1-1/2-inch and smaller.

If Seale construction or similar large outer wire type construction in the 6 x 19 class is to be used for sizes 1-inch and larger, add one additional clip. For other classes or wire rope not mentioned, it may be necessary to add additional clips to the number shown. If more clips are used than shown, amount of rope turn back should be increased proportionately.