 |
Chicago Hardware
The turned eyebolts shown are manufactured from low carbon cold drawn steel wire. The threads are NC rolled machine threads. One hex nut is supplied with each eye bolt. Standard finish is Electro Galvanized. Other rust preventative finishes or self colored are available on a special basis.
|
| STOCK NUMBER |
DIMENSIONS ARE IN INCHES | MAX. LOAD In Lbs. |
||||
|---|---|---|---|---|---|---|
| A | B | C | D | T | ||
| A-1 | 1/8 (6-32) | 3/4 | 1/4 | 1-1/4 | 5/8 | 22 |
| B-1 | 5/32 (8-32) | 1-1/8 | 1/4 | 1-11/16 | 1 | 36 |
| C-1 | 3/16 (10-24) | 1 | 3/8 | 1-11/16 | 7/8 | 38 |
| C-2 | 3/16 | 1-3/8 | 5/16 | 2 | 1-1/4 | 38 |
| C-3 | 3/16 | 2 | 3/8 | 2-11/16 | 1 | 38 |
| C-4 | 3/16 | 3 | 3/8 | 3-11/16 | 1-1/2 | 38 |
| D-1 | 7/32 (12-24) | 1-1/2 | 3/8 | 2-1/4 | 1-3/8 | 52 |
| E-1 | 1/4-20 | 1 | 1/2 | 2 | 7/8 | 74 |
| E-2 | 1/4-20 | 1-1/2 | 1/2 | 2-1/2 | 1-1/4 | 74 |
| E-2A | 1/4-20 | 1-7/8 | 7/16 | 2-3/4 | 1-5/8 | 74 |
| E-3 | 1/4-20 | 2 | 1/2 | 3 | 1-1/4 | 74 |
| E-4 | 1/4-20 | 2-1/5 | 1/2 | 3-1/2 | 1-1/4 | 74 |
| E-5 | 1/4-20 | 3 | 1/2 | 4 | 1-1/2 | 74 |
| E-6 | 1/4-20 | 3-1/2 | 1/2 | 4-1/2 | 2 | 74 |
| E-7 | 1/4-20 | 4 | 1/2 | 5 | 2-1/2 | 74 |
| E-8 | 1/4-20 | 5 | 1/2 | 6 | 3 | 74 |
| E-9 | 1/4-20 | 6 | 1/2 | 7 | 4 | 74 |
| F-1 | 5/16-18 | 1 | 5/8 | 2-1/8 | 7/8 | 96 |
| F-2 | 5/16-18 | 2 | 5/8 | 3-1/8 | 1-1/4 | 96 |
| F-2A | 5/16-18 | 2-1/4 | 9/16 | 3-3/8 | 2 | 96 |
| F-3 | 5/16-18 | 2-1/2 | 5/8 | 3-5/8 | 1-1/4 | 96 |
| F-4 | 5/16-18 | 3 | 5/8 | 4-1/8 | 1-1/2 | 96 |
| F-5 | 5/16-18 | 3-1/2 | 5/8 | 4-5/8 | 2 | 96 |
| F-6 | 5/16-18 | 4 | 5/8 | 5-1/8 | 2-1/2 | 96 |
| F-7 | 5/16-18 | 5 | 5/8 | 6-1/8 | 3 | 96 |
| F-8 | 5/16-18 | 6 | 5/8 | 7-1/8 | 4 | 96 |
| F-9 | 5/16-18 | 6-1/2 | 7/8 | 7-3/4 | 4 | 96 |
| G-1 | 3/8-16 | 1 | 3/4 | 2-1/2 | 7/8 | 144 |
| G-2 | 3/8-16 | 2 | 3/4 | 3-1/2 | 1-1/4 | 144 |
| G-2A | 3/8-16 | 2-1/2 | 21/32 | 3-3/4 | 2-1/4 | 144 |
| G-3 | 3/8-16 | 2-1/2 | 3/4 | 4 | 1-1/2 | 144 |
| G-4 | 3/8-16 | 3 | 3/4 | 4-1/2 | 1-1/2 | 144 |
| G-5 | 3/8-16 | 3-1/2 | 3/4 | 5 | 2 | 144 |
| G-6 | 3/8-16 | 4 | 3/4 | 5-1/2 | 2-1/2 | 144 |
| G-7 | 3/8-16 | 5 | 3/4 | 6-1/2 | 3 | 144 |
| G-8 | 3/8-16 | 6 | 3/4 | 7-1/2 | 4 | 144 |
| G-9 | 3/8-16 | 8 | 3/4 | 9-1/2 | 4 | 144 |
| G-10 | 3/8-16 | 10 | 3/4 | 11-1/2 | 4 | 144 |
| G-11 | 3/8-16 | 12 | 3/4 | 13-1/2 | 4 | 144 |
| H-1 | 7/16-14 | 6 | 7/8 | 7-3/4 | 4 | 216 |
| H-2 | 7/16-14 | 8 | 7/8 | 9-3/4 | 4 | 216 |
| J-1 | 1/2-13 | 2 | 1 | 4 | 1-1/2 | 298 |
| J-2 | 1/2-13 | 4 | 1 | 6 | 2-1/2 | 298 |
| J-3 | 1/2-13 | 6 | 1 | 8 | 4 | 298 |
| J-4 | 1/2-13 | 8 | 1 | 10 | 4 | 298 |
| J-5 | 1/2-13 | 10 | 1 | 12 | 4 | 298 |
For Stronger Turned Eyebolts check out our
Welded Eye Turned Eyebolts
For more information about Chicago Hardware and Fixture products go to their website at:
http://www.chicagohardware.com/
Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201 Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: sales@smithfast.com Copyright © 2009 by Smith Fastener Company |
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools