Weatherhead® Inverted Flare Fittings

Male Connectors

P/N	Tube O.D.	Male Pipe Thread	C Hex	D Dia	L Length	Material
202X2	1/8	1/8	13/32	.078	.62	Brass
202X3	3/16	1/8	15/32	.125	.70	Brass
202X4	1/4	1/8	17/32	.188	.74	Brass
202X4X4	1/4	1/4	9/16	.188	.89	Brass
202X5	5/16	1/8	19/32	.219	.79	Brass
202X5X4	5/16	1/4	19/32	.220	.98	Brass
202X6X2	3/8	1/8	3/4	.281	.89	Brass
202X6	3/8	1/4	3/4	.281	1.03	Brass
202X6X6	3/8	3/8	3/4	.281	1.01	Brass
202X7	7/16	1/4	13/16	.344	1.05	Brass
202X8X4	1/2	1/4	29/32	.406	1.08	Brass
202X8	1/2	3/8	29/32	.406	1.07	Brass
202X8X8	1/2	1/2	29/32	.406	1.26	Brass
202X10	5/8	1/2	1-1/16	.531	1.32	Brass
202X12X8	3/4	1/2	1-1/4	.562	1.38	Brass
202X12	3/4	3/4	1-1/4	.625	1.39	Brass
202X14	7/8	3/4	1-3/8	.750	1.38	Brass
202X16	1.0	1.0	1.5	.812	1.62	Brass

Note: Pipe end drill may be reduced or increased from seat diameter D.
Ref. SAE number 040102

Std Female Thread Sizes

Tube OD	1/8	3/16	1/4	5/16	3/8	7/16	1/2	5/8	3/4	7/8	1.0
Thread	.312-28	.375-16	.438-24	.500-20	.625-18	.688-18	.750-18	.875-18	1.062-16	3.188-16	1.312-16

For more information about Weatherhead® products go to the Weatherhead® website at:
http://www.dana.com/weatherhead/products1.htm

Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201 Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: sales@smithfast.com Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools