Link to Home PageLink to our Showroom LobbyLink To the Table of ContentsClick here to Contact Smith Fastener
Link to Our Chicago Construction and Lifting Hardware

Drop Forged Lift Eyes Chicago Hardware
Drop Forged
Lifting Eyes		 Lifting Eyes Dimensioning Sketch

DROP FORGED LIFTING EYES
STOCK
NUMBER		 SHANK ALL DIMENSIONS ARE IN INCHES THREAD
LENGTH
H L A C B E F G S R
C-186 5/16 1 1-1/4 3/4 1-1/16 19/32 1/2 3/8 1/4 2-11/16 7/8
C-187 3/8 1-1/8 1-5/8 1 1-1/4 3/4 9/16 1/2 5/16 3-3/16 1
C-185 1/2 1-1/4 2 1-1/4 1-1/2 1 13/16 5/8 3/8 3-3/4 1-1/8
C-181 5/8 1-1/2 2-1/2 1-1/5 2 1-3/16 1 11/16 1/2 4-11/16 1-3/8
C-184 3/4 1-7/8 3 1-3/4 2-3/8 1-3/8 1-1/8 7/8 5/8 5-3/4 1-3/4
C-188 7/8 2 3-1/2 2 2-5/8 1-5/8 1-5/16 15/16 3/4 6-5/8 1-7/8
Drop Forged from C-1035 steel, heat treated. Available blank or threaded.
Self colored finish is standard; hot galvanized or other finishes supplied on a special basis. Used in lifting applications where larger eyes are required. When ordering prefix the stock number the the letter "B" for blanks. or "T" for threaded as required.

STOCK
NUMBER		 BAIL
SIZE		 BLANK
PART
NUMBER		 THREADED
PART
NUMBER		 THREADED
WORKING
LOAD LIMIT
IN LBS
C-186 1/4 15005 7 15505 2 860
C-187 5/169 15010 1 15510 6 1260
C-185 3/8 15015 6 15515 1 2200
C-181 1/2 15020 0 15520 5 3600
C-141 5/8 15025 5 15525 0 5200
C-188 3/4 15030 9 15530 4 7000
Vertical Loads are based on a safety factor of 5 to 1. The maximum load is based on a straight, vertical, lift in a gradually increasing manner and should never be used for angular lifts.
For more information about Chicago Hardware and Fixture products go to their website at: http://www.chicagohardware.com/
Smith Fastener Company, A California Corporation - 3613 East Florence Avenue, Bell, California, 90201 - Phone: ( 323 ) 587-0382 and ( 800 ) 764-8488 - FAX: ( 323 ) 587-8712 - E-mail: sales@smithfast.com - Copyright © 2000 by Smith Fastener Company - Please report website problems to: WebMaster - Last updated: February 6th, 2004 - http://www.smithfast.com/lifteye.htm