 |
Hammer-Set® Nail Drive Anchor Installation |
Specified for anchorage into concrete, brick or block |
|
 |
Drill hole through material to be fastened into base material. See chart below for drill size. |
 |
Insert Hammer-Set® Nail Drive Anchor into hole until head of anchor body is flush with material to be fastened. Tap the nail until flush with head of anchor. |
 |
Anchor is now set. |
SELECTION CHART
| CATALOG NUMBER |
DESCRIPTION | DRILL SIZE | MAX. FIXTURE THICKNESS |
MINIMUM EMBEDMENT |
MINIMUM HOLE SIZE |
QTY PER BOX |
WGHT PER BOX |
QTY & WGHT PER MASTER CARTON |
||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inches | (mm) | Inches | (mm) | Inches | (mm) | Inches | (mm) | Inches | (mm) | Qty | Lbs. | Qty. | Lbs. | |
| HS-1607 | 3/16x7/8 | (4.8x22.2) | 3/16 | (4.8) | 1/4 | (6.4) | 5/8 | (15.9) | 1-1/8 | (28.6) | 100 | 2 | 1000 | 20 |
| HS-1406 | 1/4x3/4 | (6.4x19.1) | 1/4 | (6.4) | 1/8 | (3.2) | 5/8 | (15.9) | 1 | (25.4) | 100 | 2.2 | 1000 | 22 |
| HS-1410 | 1/4x1 | (6.4x25.4) | 1/4 | (6.4) | 1/4 | (6.4) | 3/4 | (19.1) | 1-1/4 | (31.8) | 100 | 2.4 | 1000 | 24 |
| HS-1412 | 1/4x1-1/4 | (6.4x31.8) | 1/4 | (6.4) | 1/2 | (12.7) | 3/4 | (19.1) | 1-1/2 | (38.1) | 100 | 2.6 | 1000 | 26 |
| HS-1414 | 1/4x1-1/2 | (6.4x38.1) | 1/4 | (6.4) | 3/4 | (19.1) | 3/4 | (19.1) | 1-3/4 | (44.5) | 100 | 2.8 | 1000 | 28 |
| HS-1420 | 1/4x2 | (6.4x50.8) | 1/4 | (6.4) | 1-1/4 | (31.8) | 3/4 | (19.1) | 2-1/4 | (57.2) | 100 | 3.5 | 1000 | 35 |
Hammer-Set® Anchors are not for Overhead Applications.
See Redi-Drive® Anchors for overhead work.
Return to Hammer-Set® Anchors
For more information about Red Head® products go to the Red Head® website at:
http://www.itwredhead.com/
Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201 Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: sales@smithfast.com Copyright © 2009 by Smith Fastener Company |
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools