Red Head®
Redi-Bolt®
Removable Anchors

Link to Home PageLink To the Table of ContentsClick here to Contact Smith Fastener
Link to our Showroom LobbyLink to Red Head® Anchors

Specified for anchorage into solid concrete and concrete fill

The Redi-Bolt® features a patented double expansion sleeve, grad 5, high strength threaded bolt, a steel expander cone and washer. The exposed enf of the anchor is stamped by Red Head® to identify anchoe length post-installation. Anchors should be installed with carbide type drill bits made in accordance to ANSI B212.15-1994.

ADVANTAGES
  • Up to 22% more pullout than wedge anchors
  • Up to 48% more shear than wedge anchors
  • Up to 40% more pullout than traditional sleeve anchors
  • Up to 61% more shear than traditional sleeve anchors
What does this mean?
  • Use of a smaller diameter anchor
    • Cost saving for size
  • Use of a smaller drill bit
  • Less drilling depth
    • Faster and Quicker drill time

Redi-Bolt Performance Table


Installation Instructions


For more information about Red Head® products go to the Red Head® website at:
http://www.itw-ramset.com/

Smith Fastener Company, A California Corporation - 3613 East Florence Avenue, Bell, California, 90201 - Phone: ( 323 ) 587-0382 and ( 800 ) 764-8488 - FAX: ( 323 ) 587-8712 - E-mail: sales@smithfast.com - Copyright © 2000 by Smith Fastener Company - Please report website problems to: WebMaster - Last updated: July 19th, 2000 - http://www.smithfast.com/redibolt.htm