Red Head® DYNABOLT®
Anchor Installation Steps

Specified for anchorage into concrete, masonry, grout-filled block and hollow block

For more information about Red Head® products go to the
Red Head® website at: http://www.itwredhead.com/



Select a carbide drill bit with a diameter equal to the anchor diameter. Drill hole to any depth exceeding the desired minimum embedment. Clean hole of all dust and residue. Please wear eye protection.
Insert assembled anchor into hole, so that washer or head is flush with materials to be fastened.
Expand anchor by tightening nut or head 2 to 3 turns.

Return to Dynabolt®




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools