Red Head® Epcon® A7 Anchoring Adhesive

A strong, fast curing acrylic adhesive




The advantages of Epcon® A7 Acrylic Adhesive are numerous

  • All Weather Formula
    • Down to 0° and below
  • No Drip, No Sag, Easy Clean Up
  • Fast and Easy Dispensing
    • 28 oz carteidgr in 16 seconds
  • Fast Curing Time
    • 35 minutes at 60° F
  • Not mix ratio sensative
    • Actually a 20:1 formula mixed at 10:1
      doubles the hardener
  • Rods are Easier To Insert compared to other adhesives
  • Works in damp holes
  • Requires Less Adhesive
    • Can be used in 1/8" or 1/16" oversized holes
  • One Formula For Both Hollow and Solid base Materials

Installation

For more information about Red Head® products go to the Red Head® website at:
http://www.itwredhead.com/




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools