Chicago Hardware
Turned Eye Bolts

The turned eyebolts shown are manufactured from low carbon cold drawn steel wire. The threads are NC rolled machine threads. One hex nut is supplied with each eye bolt. Standard finish is Electro Galvanized. Other rust preventative finishes or self colored are available on a special basis.


STOCK
NUMBER
DIMENSIONS ARE IN INCHES MAX.
LOAD
In Lbs.
A B C D T
A-1 1/8 (6-32) 3/4 1/4 1-1/4 5/8 22
B-1 5/32 (8-32) 1-1/8 1/4 1-11/16 1 36
C-1 3/16 (10-24) 1 3/8 1-11/16 7/8 38
C-2 3/16 1-3/8 5/16 2 1-1/4 38
C-3 3/16 2 3/8 2-11/16 1 38
C-4 3/16 3 3/8 3-11/16 1-1/2 38
D-1 7/32 (12-24) 1-1/2 3/8 2-1/4 1-3/8 52
E-1 1/4-20 1 1/2 2 7/8 74
E-2 1/4-20 1-1/2 1/2 2-1/2 1-1/4 74
E-2A 1/4-20 1-7/8 7/16 2-3/4 1-5/8 74
E-3 1/4-20 2 1/2 3 1-1/4 74
E-4 1/4-20 2-1/5 1/2 3-1/2 1-1/4 74
E-5 1/4-20 3 1/2 4 1-1/2 74
E-6 1/4-20 3-1/2 1/2 4-1/2 2 74
E-7 1/4-20 4 1/2 5 2-1/2 74
E-8 1/4-20 5 1/2 6 3 74
E-9 1/4-20 6 1/2 7 4 74
F-1 5/16-18 1 5/8 2-1/8 7/8 96
F-2 5/16-18 2 5/8 3-1/8 1-1/4 96
F-2A 5/16-18 2-1/4 9/16 3-3/8 2 96
F-3 5/16-18 2-1/2 5/8 3-5/8 1-1/4 96
F-4 5/16-18 3 5/8 4-1/8 1-1/2 96
F-5 5/16-18 3-1/2 5/8 4-5/8 2 96
F-6 5/16-18 4 5/8 5-1/8 2-1/2 96
F-7 5/16-18 5 5/8 6-1/8 3 96
F-8 5/16-18 6 5/8 7-1/8 4 96
F-9 5/16-18 6-1/2 7/8 7-3/4 4 96
G-1 3/8-16 1 3/4 2-1/2 7/8 144
G-2 3/8-16 2 3/4 3-1/2 1-1/4 144
G-2A 3/8-16 2-1/2 21/32 3-3/4 2-1/4 144
G-3 3/8-16 2-1/2 3/4 4 1-1/2 144
G-4 3/8-16 3 3/4 4-1/2 1-1/2 144
G-5 3/8-16 3-1/2 3/4 5 2 144
G-6 3/8-16 4 3/4 5-1/2 2-1/2 144
G-7 3/8-16 5 3/4 6-1/2 3 144
G-8 3/8-16 6 3/4 7-1/2 4 144
G-9 3/8-16 8 3/4 9-1/2 4 144
G-10 3/8-16 10 3/4 11-1/2 4 144
G-11 3/8-16 12 3/4 13-1/2 4 144
H-1 7/16-14 6 7/8 7-3/4 4 216
H-2 7/16-14 8 7/8 9-3/4 4 216
J-1 1/2-13 2 1 4 1-1/2 298
J-2 1/2-13 4 1 6 2-1/2 298
J-3 1/2-13 6 1 8 4 298
J-4 1/2-13 8 1 10 4 298
J-5 1/2-13 10 1 12 4 298


For Stronger Turned Eyebolts check out our
Welded Eye Turned Eyebolts



For more information about Chicago Hardware and Fixture products go to their website at:
http://www.chicagohardware.com/



Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools