HD Eye Nut Dwg.

Chicago Hardware

Heavy Duty Eye Nut
Available Drilled and Tapped 2B, or Blank. Forged from C-1035 steel. Supplied with self-colored finish. For more information about Chicago Hardware and Fixture products go to the Chicago Hardware® website at: http://www.chicagohardware.com/



SPECIFICATIONS

(IN INCHES)

STOCK
NO.
C M F E G H T MAX.
LOAD

(In Tons)
100 7/8 5/16 3/8-16 3/4 3/4 3/4 3/4 2-1/4 .9
101 1-1/8 7/16 1/2-13 1 1 1 1 3 1.8
102 1-3/8 9/16 5/8-11 1-1/4 1-1/4 1-1/4 1-1/4 3-3/4 2.9
103 1-1/2 3/4 34-10 1-3/4 1-1/4 1-1/8 1-1/2 3-7/8 5.3
104 1-5/8 7-8 7/8-9 2 1-1/4 1 1-11/16 3-15/16 7.2
105 1-3/4 1 1-8 2-1/4 1-5/8 1-1/4 1-7/8 4-3/4 9.4
105A 1-3/4 1 1-1/8-7 2-1/4 1-5/8 1-1/4 1-7/8 4-3/4 11.3
106 2 1-1/4 1.25-7 2-7/8 1-7/8 1-3/8 2-1/4 5-1/2 14.7
107 2-1/2 1-3/8 1.50-6 3-1/8 2-1/8 1-3/4 2-5/8 6-1/2 17.8
Note: Loads shown apply to Eye Nuts only, based on a vertical pull, not to any connecting bolt or stud.



STOCK NUMBER BAIL SIZE BLANK DRILLED & TAPPED
PART
NUMBER
TAP SIZE PART NUMBER
100 5/16 17005 5 3/8-16 17255 4
101 7/16 17010 9 1/2-13 17260 8
102 9/16 17015 4 5/8-11 17265 3
103 3/4 17020 8 3/4-10 17270 7
104 7/8 17025 3 7/8-9 17275 2
105 1 17030 7 1-8 17280 6
105A 1 17035 2 1-1/8-7 17285 1
106 1-1/4 17040 6 1-1/4-7 17290 5
107 1-3/8 17045 1 1-1/2-6 17295 0




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools