Weatherhead®
Inverted Flare Fittings


Male Connectors

P/N Tube O.D. Male
Pipe
Thread
C Hex D Dia L Length Material
202X2 1/8 1/8 13/32 .078 .62 Brass
202X3 3/16 1/8 15/32 .125 .70 Brass
202X4 1/4 1/8 17/32 .188 .74 Brass
202X4X4 1/4 1/4 9/16 .188 .89 Brass
202X5 5/16 1/8 19/32 .219 .79 Brass
202X5X4 5/16 1/4 19/32 .220 .98 Brass
202X6X2 3/8 1/8 3/4 .281 .89 Brass
202X6 3/8 1/4 3/4 .281 1.03 Brass
202X6X6 3/8 3/8 3/4 .281 1.01 Brass
202X7 7/16 1/4 13/16 .344 1.05 Brass
202X8X4 1/2 1/4 29/32 .406 1.08 Brass
202X8 1/2 3/8 29/32 .406 1.07 Brass
202X8X8 1/2 1/2 29/32 .406 1.26 Brass
202X10 5/8 1/2 1-1/16 .531 1.32 Brass
202X12X8 3/4 1/2 1-1/4 .562 1.38 Brass
202X12 3/4 3/4 1-1/4 .625 1.39 Brass
202X14 7/8 3/4 1-3/8 .750 1.38 Brass
202X16 1.0 1.0 1.5 .812 1.62 Brass

Note: Pipe end drill may be reduced or increased from seat diameter D.
Ref. SAE number 040102


Std Female Thread Sizes

Tube OD 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1.0
Thread .312-28 .375-16 .438-24 .500-20 .625-18 .688-18 .750-18 .875-18 1.062-16 3.188-16 1.312-16
For more information about Weatherhead® products go to the Weatherhead® website at:
http://www.dana.com/weatherhead/products1.htm




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools