Lifting Eyes Dimensioning Sketch

CHICAGO HARDWARE

Drop Forged Lifting Eyes

Drop Forged from C-1035 steel, heat treated. Available blank or threaded.
Self colored finish is standard; hot galvanized or other finishes supplied on
a special basis. Used in lifting applications where larger eyes are required. When ordering prefix the stock number the the letter "B" for blanks. or "T" for threaded as required. Vertical Loads are based on a safety factor of 5 to 1. The maximum load is based on a straight, vertical, lift in a gradually increasing manner and should never be used for angular lifts. For more information about Chicago Hardware and Fixture products go to their website at: http://www.chicagohardware.com/



STOCK
NUMBER
SHANK ALL DIMENSIONS ARE IN INCHES THREAD
LENGTH
H L A C B E F G S R
C-186 5/16 1 1-1/4 3/4 1-1/16 19/32 1/2 3/8 1/4 2-11/16 7/8
C-187 3/8 1-1/8 1-5/8 1 1-1/4 3/4 9/16 1/2 5/16 3-3/16 1
C-185 1/2 1-1/4 2 1-1/4 1-1/2 1 13/16 5/8 3/8 3-3/4 1-1/8
C-181 5/8 1-1/2 2-1/2 1-1/5 2 1-3/16 1 11/16 1/2 4-11/16 1-3/8
C-184 3/4 1-7/8 3 1-3/4 2-3/8 1-3/8 1-1/8 7/8 5/8 5-3/4 1-3/4
C-188 7/8 2 3-1/2 2 2-5/8 1-5/8 1-5/16 15/16 3/4 6-5/8 1-7/8


STOCK
NUMBER
BAIL
SIZE
BLANK
PART
NUMBER
THREADED
PART
NUMBER
THREADED
WORKING
LOAD LIMIT
IN LBS
C-186 1/4 15005 7 15505 2 860
C-187 5/169 15010 1 15510 6 1260
C-185 3/8 15015 6 15515 1 2200
C-181 1/2 15020 0 15520 5 3600
C-141 5/8 15025 5 15525 0 5200
C-188 3/4 15030 9 15530 4 7000




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools