Hammer-Set® Nail Drive Anchor Installation

Specified for anchorage into concrete, brick or block




Drill hole through material to be fastened into base material. See chart below for drill size.
Insert Hammer-Set® Nail Drive Anchor into hole until head of anchor body is flush with material to be fastened. Tap the nail until flush with head of anchor.
Anchor is now set.



SELECTION CHART

CATALOG
NUMBER
DESCRIPTION DRILL SIZE MAX. FIXTURE
THICKNESS
MINIMUM
EMBEDMENT
MINIMUM
HOLE SIZE
QTY
PER
BOX
WGHT
PER
BOX
QTY & WGHT
PER MASTER
CARTON
Inches (mm) Inches (mm) Inches (mm) Inches (mm) Inches (mm) Qty Lbs. Qty. Lbs.
HS-1607 3/16x7/8 (4.8x22.2) 3/16 (4.8) 1/4 (6.4) 5/8 (15.9) 1-1/8 (28.6) 100 2 1000 20
HS-1406 1/4x3/4 (6.4x19.1) 1/4 (6.4) 1/8 (3.2) 5/8 (15.9) 1 (25.4) 100 2.2 1000 22
HS-1410 1/4x1 (6.4x25.4) 1/4 (6.4) 1/4 (6.4) 3/4 (19.1) 1-1/4 (31.8) 100 2.4 1000 24
HS-1412 1/4x1-1/4 (6.4x31.8) 1/4 (6.4) 1/2 (12.7) 3/4 (19.1) 1-1/2 (38.1) 100 2.6 1000 26
HS-1414 1/4x1-1/2 (6.4x38.1) 1/4 (6.4) 3/4 (19.1) 3/4 (19.1) 1-3/4 (44.5) 100 2.8 1000 28
HS-1420 1/4x2 (6.4x50.8) 1/4 (6.4) 1-1/4 (31.8) 3/4 (19.1) 2-1/4 (57.2) 100 3.5 1000 35

Hammer-Set® Anchors are not for Overhead Applications.
See Redi-Drive® Anchors for overhead work.

Return to Hammer-Set® Anchors


For more information about Red Head® products go to the Red Head® website at:
http://www.itwredhead.com/

Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools