Welcome to the Blind Rivet Page

We proudly stock Marson Corp. quality rivets and tools.

Open End

For blind fastening where there is no access to the opposite side of work. - Simple to install - Wide variety of head styles and lengths - .188 to .250 dia. head Available materials are: Steel/Steel, Aluminum/Aluminum, Aluminum/Steel, Stainless/Stainless, Stainless/Steel, Copper/Brass, and Copper/Steel.

Closed End

Moisture resistant due to tight seal - Greater shear and tensile strength - Mandrel is retained 100% of the time - .125 to .250 dia. head - Available materials are: Aluminum/Steel, Aluminum/Aluminum, and Stainless/Stainless

Multi-Grip

Extended grip range capacity - Reduces inventory (fewer sizes required) - Use as a standard open end rivet - No special tools required - .125 to .188 dia. head - Available materials are: Aluminum/Steel, and Steel/Steel

Q-Lok

Retained mandral increases shear and tensil strength - Use in high vibration applications - Mandrel breaks flush when used in mid-grip range - Moisture resistant due to tight seal - .125 to .188 dia. heads avail. - Available materials are: Steel/Steel

Klik-Lock

Permanently retained mandrel provided increased shear and tensil values - Use in high vibration applications - Provided weather resistant joint - .188 to .250 dia. heads avail. - Available materials are: Steel/Steel, Aluminum/Aluminum, and Stainless/Stainless

T-Rivets

High clamp up - High shear strength - Creates a wide bearing surface - .250 dia. head only - Available materials are: Aluminum/Steel

Special Application Rivets

Small flange rivet used primarily for fastening decorative materials on boats, automobiles, trucks and other motor vehicals - Best suited to applications where a discreet, secure installation of non-critical components is needed. - Available materials are: Stainless/Steel and Aluminum/Aluminum

Plastic

Precision molded, all nylon - Secure lock prevents pull out - Fasten plastic to plastic, plastic to metal or plastic to fiberglass


There are also a number of head styles to choose from





Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools