Rod End Drawing

CHICAGO HARDWARE
FORGED BLANK ROD ENDS

FORGED BLANK ROD ENDS

Drop forged from C-1035 steel. Some of the above Rod Ends
are available in Stainless Steel For more information about
Chicago Hardware and Fixture products go to their website at:
http://www.chicagohardware.com/


Specifications

(IN INCHES)
STOCK
NO.
PART
NO.
B C F A
C-134 18005 4 1/4 1/2 9/32 3
C-134A 18010 8 1/4 1/2 9/32 6
C-135 18015 3 5/16 5/8 11/32 3
C-135A 18020 7 5/16 5/8 11/32 6
C-163A 18025 2 3/8 11/16 3/8 2-1/8
C-162 18030 6 3/8 3/4 3/8 2-1/2
C-217 18035 1 3/8 3/4 7/16 2
C-136 18040 5 3/8 3/4 7/16 6
C-137 18045 0 7/16 7/8 1/2 6
C-245 18050 4 1/2 15/16 9/16 1-3/4
C-163 18055 9 1/2 15/16 9/16 3-1/8
C-212 18060 3 1/2 1 9/16 3-1/2
C-138 18065 8 1/2 1 9/16 6
C-195 18070 2 1/2 1 9/16 10
C-189 18075 7 5/8 1-1/4 11/16 3
C-303 18080 1 5/8 1-3/16 5/8 3-1/2
C-139 18085 6 5/8 1-1/4 11/16 6
C-172 18090 0 5/8 1-1/4 11/16 8
C-196 18095 5 5/8 1-1/4 11/16 10
C-216 18100 6 3/4 1-1/2 13/16 3-1/2
C-140 18105 1 3/4 1-1/2 13/16 6
C-197 18110 5 3/4 1-1/2 13/16 10
C-141 18115 0 7/8 1-3/4 15/16 6
C-211 18120 4 7/8 1-3/4 15/16 12
C-142 18125 9 1 2 1-1/16 6
C-142A 18130 3 1 2 1-1/16 12
C-282 18135 8 1-1/4 2/1/2 1-5/16 12
Note: Average properties of C-1035 natural hot rolled steel is
75/85,000 lbs. P.S.I. tensil and 40/55,000 lbs. P.S.I. yield.




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools