Selfalign® Assembly Data Chart

Nylon Tubing
Annealed Copper and
Soft Aluminum Tubing
Type "T"
Thin Wall
Type "H"
Thick Wall
Fitting
Size
Wall *Turns Wall *Turns Wall *Turns
2 .030 1-1/3 - - - -
3 .030 1-1/3 .023 1-2/3 .039 1-1/3
4 .030 1-2/3 .030 2 .050 1-2/3
5 .032 1-2/3 .036 1-2/3 .062 2-2/3
6 .032 2 .040 1-2/3 .075 2
8 .032 2 - - - -
10 .035 2 - - - -
12 .049 2 - - - -
16 .065 2-1/4 - - - -



Nut Assembly Comparison

Tube O.D. E
Tube Stop
Depth
H
STD Nut
H1
Long Nut
1/8 .19 .24 -
3/16 .22 .25 .49
1/4 .25 .35 .61
5/16 .28 .30 .70
3/8 .31 .31 .75
1/2 .38 .36 .83
5/8 .38 .41 .92
3/4 .44 .41 1.14

Note that H and H1 are hand tight.



Illustration shows Selfalign® fitting used with soft plastic tubing and brass insert.



Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools