SOCKET SET SCREWS - Inch and Metric

We have a pretty wide range of Set Screws in our inventory. The sizes shown represent a standard industry range. Some of the screws smaller than the largest have lengths greater than shown for the largest. We are not limited to the ranges shown. If you are not sure if the size you require is included give us a call, we may have it on our shelves. We can also supply screws outside the ranges shown.

ILLUSTRATION DESCRIPTION CLASS MATERIAL STD SIZES
Cup Point
U.N.R.C.
Fine Thread
ASME B18.3
Class 3A Threads
Heat Treated
Alloy Steel
4-40x1/8 thru 1.00-8x3
Cup Point
U.N.R.C.
Fine Thread
ASME B18.3
Class 3A Threads
Heat Treated
Alloy Steel
4-48x1/8 thru 5/8-18x1
METRIC
Cup Point
ISO Metric Threads Heat Treated
Alloy Steel
M3-0.5x3 thru M20-2.5x60
Half Dog Point
Coarse and
Fine Thread
ASME B18.3
Class 3A Threads
Heat Treated
Alloy Steel
8-32x1/4 thru 1/2-13x3/4
Cone Point
Coarse and
Fine Thread
ASME B18.3
Class 3A Threads
Heat Treated
Alloy Steel
6-32x1/8 thru 3/8-16x1/2
Flat Point
Coarse and
Fine Thread
ASME B18.3
Class 3A Threads
Heat Treated
Alloy Steel
4-40x1/8 thru 1/2-13x3/4
Oval Point
Coarse Thread
ASME B18.3
Class 3A Threads
Heat Treated
Alloy Steel
8-32x1/4 thru 3/8-16x5/8




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools