Round Pin Chain Shackle

Round Pin Chain Shackle

Forged C-1035 steel. Available self colored or hot-dipped galvanized finish. Other rust preventative coatings are available on a special basis. Please specify the size, the finish, and the shackle type when ordering. For more information about Chicago Hardware and Fixture products go to their website at: http://www.chicagohardware.com/



DIMENSIONS IN INCHES
SIZE
DIA.
INSIDE EYE
O.D.
PIN or
BOLT
DIA.
MAXIMUM
LOAD TONS
WIDTH
@ EYES
TOL.
+/-
LENGTH TOL.
+/-
1/4 15/32 1/16 7/8 1/16 3/4 5/16 1/2
5/16 17/32 1/16 1 1/16 7/8 3/8 3/4
3/8 21/32 1/16 1-1/4 1/8 1 7/16 1
7/16 23/32 1/16 1-1/2 1/8 1-1/8 1/2 1-1/2
1/2 13/16 1/16 1-11/16 1/8 1-1/4 5/8 2
5/8 1-1/16 1/16 2 1/8 1-5/8 3/4 3-1/4
3/4 1-1/4 1/16 2-5/16 1/4 1-7/8 7/8 4-3/4
7/8 1-7/16 1/16 2-7/8 1/4 2-1/8 1 6-1/2
1 1-11/16 1/16 3-1/4 1/4 2-1/2 1-1/8 8-1/2
Loads are based on a safety factor of 6 to 1. When tested all shackles are pulled at a uniform rate of speed in a direct tension. Any deviations such as angular lifts, shock loads, modification of the basic forging etc. will result in drastically reduced maximum loads.




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools