Hex Washer Head Slotted Self-Piercing Screws



Thread Specifications and Dimensions
Size A W H F U J T D d
Width Across
Flats
Width
Across
Corner
Head Height Washer
Diameter
Washer
Thickness
Slot Width Slot Depth Major
Diameter
Minor
Diameter
Max Min Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min
6-18 .250 .244 .272 .093 .080 .328 .302 .025 .015 .048 .039 .053 .033 .141 .136 .102 .096
7-16 .250 .244 .272 .093 .080 .328 .302 .029 .017 .048 .039 .062 .040 .158 .152 .114 .108
8-15 .250 .244 .272 .110 .096 .348 .322 .031 .019 .054 .045 .074 .052 .168 .162 .123 .116
10-12 .250 .244 .272 .110 .096 .414 .384 .031 .019 .054 .045 .074 .052 .194 .188 .133 .126
Tolerance on Length = +/- .05


  • Description:   A slotted hex washer head thread forming tapping screw with a single lead thread rolled to the tip of an extra sharp point, and a second thread spaced 180® apart.
  • Applications:   May be used in thin metal (less than .050 thick). Eliminates need for pre-drilled or pre-punched holes. Undercut area beneath the head allows greater length of thread engagement. Twin lead threads help to reduce driving torque.
  • Material:     Steel: AISI 1018 or equivalent steel.
  • Heat Treatment:   Quenched in liquid and then tempered by reheating to 650°F minimum
  • Surface Hardness:   Rockwell C45 Minimum
  • Case Depth:   No. 6 Diameter - .002-.007, Nos. 7 thru 10 diameter - .004 - .009
  • Core Hardness     Steel: Rockwell C28 - C38 after tempering.
  • Plating:   See plating pages

See
Self Drilling Screws for a list of Self Drilling Screws.



Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools