Red Head® STUD Anchors

Specified for anchorage into concrete
Installation Steps

For more information about Red Head® products go to the Red Head® website at:
http://www.itwredhead.com/



Using a carbide drill bit, drill a hole with a diameter equal to the anchor diameter. Drill hole to required imbedment depth. Clean hole of dust and residue. Please wear eye protection.
Drive assembled anchor into hole, with expander plug to hole bottom, through material to be fastened.
Expand anchor by driving anchor over plug with hammer.

Return to Stud Anchors




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools