Red Head® TRUBOLT®
Wedge Anchors

Specified for anchorage into concrete

The Trubolt® features a type 18-8 stainless steel split expansion ring and a threaded stud bolt body and
integral cone expander, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped
galvanized carbon steel
, type 304 stainless steel or type 316 stainless steel as identified in the drawings
or other notations. Anchors are tested to ASTM E488 criteria and listed by ICBO and SBCCI .

Anchors are listed by the following agencies as required by the local building code: UL, FM, City of Los Angeles,
California State Fire Marshal and Cal Trans.

For more information about Red Head® products go to the Red Head® website at:
http://www.itwredhead.com/



ADVANTAGES

  • Versatile fully threaded design is standard on sizes up to 3/4" Dia. and 7" length
  • Anchor diameter equals hole diameter
  • One piece stainless steel expander clip resists corrosion
  • 360° contact with concrete assures full expansion for reliable working loads
  • Non botton-bearing, may be used in hole depth exceeding anchor length
  • Can be installed through the work fixture, elininating hole spotting
  • Inspectable torque values, indicating proper installation

Installation | Performance Tables




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools