Red Head®

TRUBOLT® Galvanized Carbon Steel Wedge Anchors

Catalog
Number
Thread
Length
Anchor Dia.
& Drill Bit
Size (Threads
per Inch)
Overall
Length
Maximum
Thickness
of Material
To Be fastened
Qty/Wt
Per Box
Qty/Wt
Per Master
Carton
Inches (mm) Inches (mm) Inches (mm) Qty Lbs Qty Lbs
WS-1226G 1-1/4 (31.8) 1/2-13 2-3/4 (69.9) 1/8 (3.2) 25 4.8 200 39
WS-1242G 2-3/4 (69.9) 1/2-13 4-1/4 (108) 1-1/2 (38.1) 25 6.7 150 41
WS-1245G 3 (76.2) 1/2-13 5-1/2 (139.7) 2-3/4 (69.9) 25 8 150 49
WS-1270G 4-1/2 (114.3) 1/2-13 7 (177.8) 4-1/4 (108) 25 9.7 150 59
WS-5834G 1-3/4 (44.5) 5/8-11 3-1/2 (88.9) 1/8 (3.2) 10 3.7 100 38
WS-5860G 3-1/2 (88.9) 5/8-11 6 (152.4) 2-5/8 (66.7) 10 5.6 50 29
WS-3446G 2-1/4 (57.2) 3/4-10 4-3/4 (120.7) 3/4 (19.1) 10 7.5 60 46
WS-3454G 3 (76.2) 3/4-10 5-1/2 (139.7) 1-1/2 (38.1) 10 8.4 50 42
WS-3484G 3-1/2 (88.9) 3/4-10 8-1/2 (215.9) 4-1/2 (114.3) 10 12.5 30 38
Meets ASTM A153 specifications for hot-dipped galvanizing > 45um = .002". It is highly recommended for damp, humid environments near coastal regions. Hot-dipped galvanized Trubolts® have a coating thickness of zinc that is almost 10 times as thick as electroplating. This creates greater corrosion resistance at a minimal cost.

TRUBOLTS - Installation Instructions - Performance Tables


For more information about Red Head® products go to the Red Head® website at:
http://www.itwredhead.com/




Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools