Red Head® TRUBOLT®
Zinc Plated Carbon Steel Wedge Anchors

Meets ASTM B633 SC1, Type III specifications for electroplating of 5um = .0002" thickness. This material is well suited for non-corrosive environments. For more information about Red Head® products go to the Red Head® website at:http://www.itwredhead.com/



Catalog
Number
Thread
Length
Anchor Dia.
& Drill Bit
Size (Threads
per Inch)
Overall
Length
Maximum
Thickness
of Material
To Be fastened
Qty/Wt
Per Box
Qty/Wt
Per Master
Carton
Inches (mm) Inches (mm) Inches (mm) Qty Lbs Qty Lbs
WS-1416 3/4 (19.1) 1/4-20 1-3/4 (44.5) 3/8 (9.5) 100 3.1 1000 32
WS-1422 1-1/4 (31.8) 1/4-20 2-1/4 (57.2) 7/8 (22.2) 100 3.6 1000 37
WS-1432 2-1/4 (57.2) 1/4-20 3-1/4 (82.6) 1-7/8 (47.6) 100 4.7 800 39
WS-3822 1-1/8 (28.6) 3/8-16 2-1/4 (57.2) 3/8 (9.5) 50 4.1 500 41
WS-3826 1-5/8 (41.3) 3/8-16 2-3/4 (69.9) 7/8 (22.2) 50 4.7 400 39
WS-3830 1-7/8 (47.6) 3/8-16 3 (76.2) 1-1/8 (28.6) 50 5.0 400 41
WS-3836 2-5/8 (66.7) 3/8-16 3-3/4 (95.3) 1-7/8 (47.6) 50 5.9 300 36
WS-3850 2-3/4 (69.9) 3/8-16 5 (127) 3-1/8 (79.4) 50 7.4 250 38
WS-3870 2-1/4 (57.2) 3/8-16 7 (177.8) 5-1/8 (130.2) 50 10.4 250 53
WS-1226 1-1/4 (31.8) 1/2-13 2-3/4 (69.9) 1/8 (3.2) 25 4.6 200 38
WS-1236 2-1/4 (57.2) 1/2-13 3-3/4 (95.3) 1 (25.4) 25 5.7 150 35
WS-1242 2-3/4 (69.9) 1/2-13 4-1/4 (108) 1-1/2 (38.1) 25 6.2 150 38
WS-1244 3 (76.2) 1/2-13 4-1/2 (114.3) 1-3/4 (44.5) 25 6.5 150 39
WS-1254 3 (76.2) 1/2-13 5-1/2 (139.7) 2-3/4 (69.9) 25 7.7 150 47
WS-1270 4-1/2 (114.3) 1/2-13 7 (177.8) 4-1/4 (108) 25 9.3 150 57
WS-5834 1-3/4 (44.5) 5/8-11 3-1/2 (88.9) 1/8 (3.2) 10 3.6 100 37
WS-5842 2-1/2 (63.5) 5/8-11 4-1/4 (108) 7/8 (22.2) 10 4.1 100 42
WS-5850 3-1/4 (82.6) 5/8-11 5 (127) 1-5/8 (41.3) 10 4.7 100 48
WS-5860 3-1/2 (88.9) 5/8-11 6 (152.4) 2-5/8 (66.7) 10 5.4 50 28
WS-5870 4-1/2 (114.3) 5/8-11 7 (177.8) 3-5/8 (92.1) 10 6.2 30 19
WS-5884 3-1/2 (88.9) 5/8-11 8-1/2 (215.9) 5-1/8 (130.2) 10 8 30 25
WS-58100 1-3/4 (44.5) 5/8-11 10 (254) 6-5/8 (168.3) 10 9.4 30 29
WS-3442 1-3/4 (44.5) 3/4-10 4-1/4 (108) 1/4 (31.8) 10 6.8 60 42
WS-3446 2-1/4 (57.2) 3/4-10 4-3/4 (120.7) 3/4 (19.1) 10 7.4 60 45
WS-3454 3 (76.2) 3/4-10 5-1/2 (139.7) 1-1/2 (38.1) 10 8.1 50 41
WS-3462 3-3/4 (95.3) 3/4-10 6-1/4 (158.8) 2-1/4 (57.2) 10 9.1 30 28
WS-3470 4-1/2 (114.3) 3/4-10 7 (177.8) 3 (76.2) 10 9.7 30 30
WS-3484 3-1/2 (88.9) 3/4-10 8-1/2 (215.9) 4-1/2 (114.3) 10 12.3 30 38
WS-34100 1-3/4 (44.5) 3/4-10 10 (254) 6 (152.4) 10 14 30 43
WS-34120 1-3/4 (44.5) 3/4-10 12 (304.8) 8 (203.2) 10 16.6 30 51
WS-7860 2-1/2 (63.5) 7/8-9 6 (152.4) 1-3/8 (34.9) 5 6.3 25 32
WS-7880 2-1/2 (63.5) 7/8-9 8 (203.2) 3-3/8 (85.7) 5 8.1 15 25
WS-78100 2-1/2 (63.5) 7/8-9 10 (254) 5-3/8 (136.5) 5 9.8 15 30
WS-10060 2-1/2 (63.5) 1.000-8 6 (152.4) 1/2 (12.7) 5 8.3 25 43
WS-10090 2-1/2 (63.5) 1.000-8 9 (228.6) 3-1/2 (88.9) 5 11.6 15 36
WS-100120 2-1/2 (63.5) 1.000-8 12 (304.8) 6-1/2 (165.1) 5 15 15 46
WS-12590 3-1/2 (88.9) 1-1/4-7 9 (228.6) 5-1/4 (133.4) 5 18 15 55

TRUBOLT® - Installation Instructions - Performance Tables





Smith Fastener Company • 3613 East Florence Avenue, Bell, California, 90201
Phone: ( 323 ) 587-0382 • FAX: ( 323 ) 587-8712 • E-mail: [email protected]
Copyright © 2009 by Smith Fastener Company

Hitch Pins | Construction/Lifting | Blind Rivets | Dowel Pins | Cotter Pins | Nuts, Bolts, Screws, Washers
Threaded Inserts | Anchors | Pins | Automotive | Weatherhead Pipe Fittings | Cutting Tools