Specified for anchorage into concrete

Stud Anchors feature a bolt body and pre-assembled expander plug.

Anchors should be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994.

Anchors are tested to ASTM E488 criteria and listed bt SBCC. Anchors are listed by the following agencies as required: UL,FM, City of Los Angeles.

Meets or exceeds U.S. Government G.S.A. specification FF-S-325 Group VIII, Type 2.

	ADVANTAGES
	Fast and Easy to install Anchor diameter equals hole diameter Pre-assembled - Easy to set Install anchor directly through fixture Bottom-bearing design is ideal for jacking and leveling operations Hammer-driven expansion design eliminates torque requirements, for dependable holding capacity

Commonly used to anchor equipment to concrete slabs.

Stud Anchors are available in either Carbon or Stainless Steels

Available sizes: From 1/4-20 to 3/4-10 thread and from 1-3/4 to 6-1/4 lengths

Installation

---

For more information about Red Head® products go to the Red Head® website at:
http://www.itw-ramset.com/

Smith Fastener Company, A California Corporation - 3613 East Florence Avenue, Bell, California, 90201 - Phone: ( 323 ) 587-0382 and ( 800 ) 764-8488 - FAX: ( 323 ) 587-8712 - E-mail: sales@smithfast.com - Copyright © 2000 by Smith Fastener Company - Please report website problems to: WebMaster - Last updated: June 22nd, 2000 - http://www.smithfast.com/studanc.htm