Red Head®
TRUBOLT®
Wedge Anchors

Link to Home PageLink To the Table of ContentsClick here to Contact Smith Fastener
Link to our Showroom LobbyLink to Red Head® Anchors

Specified for anchorage into concrete

The Trubolt® features a type 18-8 stainless steel split expansion ring and a threaded stud bolt body and integral cone expander, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations.

Anchors are tested to ASTM E488 criteria and listed by ICBO and SBCCI. Anchors are listed by the following agencies as required by the local building code: UL, FM, City of Los Angeles, California State Fire Marshal and Cal Trans.

ADVANTAGES
  • Versatile fully threaded design is standard on sizes up to 3/4" Dia. and 7" length
  • Anchor diameter equals hole diameter
  • One piece stainless steel expander clip resists corrosion
  • 360° contact with concrete assures full expansion for reliable working loads
  • Non botton-bearing, may be used in hole depth exceeding anchor length
  • Can be installed through the work fixture, elininating hole spotting
  • Inspectable torque values, indicating proper installation

Installation - Performance Tables


For more information about Red Head® products go to the Red Head® website at:
http://www.itw-ramset.com/

Smith Fastener Company, A California Corporation - 3613 East Florence Avenue, Bell, California, 90201 - Phone: ( 323 ) 587-0382 and ( 800 ) 764-8488 - FAX: ( 323 ) 587-8712 - E-mail: sales@smithfast.com - Copyright © 2000 by Smith Fastener Company - Please report website problems to: WebMaster - Last updated: June 22nd, 2000 - http://www.smithfast.com/trubolt.htm